Category: Bindings

Bindings for backcountry skiing and snowboarding

Beta report: 22D’s Lynx 2-pin tele binding

Last season 22 Designs introduced Lynx, their next generation 2-pin telemark binding. With that introduction the classic beta program was eliminated and 22D took orders in mid-October 2018 for a limited production run of only 500 pair. I was privileged to be one of the beta testers this past season which resulted in some moments …

Keep making backcountry turns

2-pin Tele Springs: Size Matters

While the effect of cable pivot location tends to dominate the sensation of a tele tech binding, the next strongest binding component of the tele sensation comes from the springs used. To some extent you can trade one for the other; meaning a stiff spring and a forward pivot are somewhat equal to a soft …

Keep making backcountry turns

DIY 2-pin tele: Fixing the Cable position

Now we get to the crux of building your own DIY 2-pin tele binding — the cable system. Being satisfied with the downhill performance of a tele tech binding is determined by: Position of the cable pivot (distance behind 2-pin line) Connection to the boot (real heel or 2nd heel) Springs used (stiffness and travel …

Keep making backcountry turns

DIY 2-pin Tele: Use the Force (Luke)!

Before venturing any further in chronicling tele-tech bindings, it is important to understand the forces at play in a telemark turn. For the average telemarker, this article fits in the too much information category but for do-it-yourselfers, this should prove helpful in determining the critical sweet spot of the cable pivot position. Activity The key …

Keep making backcountry turns

Picking a 2-pin tech toe for telemarking

When selecting a tech-toe for a tele tech binding keep in mind that they were not designed for the stresses of telemarking, they were designed for use in a locked-heel alpine system. In an AT binding the pins only provide side-to-side clamping power, there is no forward pressure. With tele there is also forward pressure …

Keep making backcountry turns

The State of 2-pin Telemark Bindings

Telemark Tech bindings are here to stay. The 2-pin connnection When Mark Lengel first proposed the idea of the Telemark Tech System (TTS) skepticism was the typical response. That’s a near universal first impression of the confidence inspired by the lowly 2-pin tech toe, also known by its founding brand name, Dynafit, or other terms …

Keep making backcountry turns

First Look: Marker’s Alpinist 2-pin binding

Marker has built a reputation for building alpine bindings with superior performance. Typically that means downhill performance – as in a binding that delivers a solid connection between the boot and the ski, but also knows when to let go. Marker’s new Alpinist 2-pin tech bindings maintain the alpine connection, but this time the performance …

Keep making backcountry turns